Select Size Select Core Select Tail Select Brand

Mike Stewart Science MS1-2 LTD 43" Bodyboard $224.95 From Mike: "The Science 1 is the culmination of everything I have learned about board design over the last twenty years. It features a contoured deck to optimize correct body posture, holding you in during critical turns and riding. The exclusive 'Lock' - a small cup-like cushion that surrounds your elbow, locking it in to the key riding position. Deck and hull Hand Bulbs at the front of the board enhance your grip. A rear deck channel clutches your legs yet still allows for easy weight distribution. Inside the board is an extruded Polypropylene core with a composite stringer. All this works in conjunction with a highly refined template to create a very functional system for performance." This board features a world first for the industry: The Compression Cell. The Compression Cells are soft impact absorbing cells held in a structural Polypropylene core matrix. The compression cells are placed under the elbows and in strategic areas of the board prone to impact. Features: Core: PP (This core material is designed for speed and projection. Its durability is unrivalled by any other core. Lightweight and rigid, this core will perform exceptionally well in warmer waters where other cores become slow and unresponsive) Stringer: EFG Stringer (Designed to add longevity to a board by improving stiffness and recoil while also greatly increasing the ability for projection. The stringer also enhances performance and control.) Deck: 8LB PE HAC (a Non Crosslink Polyethylene skin. Heat Activated film refers to a special coating layer that is applied to one side of the skin, alowing a strong bond to PP cores. Super comfortable and also very durable.) Slick: Surlyn Channeled Slick (Is your only choice for slick if you demand the greatest amount of response and durability. This high performance slick is the finest grade surlyn made only by Dupont, featuring elastic-like qualities and superior projection) Channels: Graduated channels (Greatly enhance control and drive, ensuring the rider has maximum command over their board when bottom turning, trimming and transitioning from rail to rail.) Tail: Clipped crescent tail (Provides superior control and hold on the wave face while also allowing for ease of rail to rail transitions and release from carves and spins.) Additional Features: Compression cells (soft impact absorbing cells held in a structural polypropylene core matrix. Placed under the elbows and in strategic areas of the board prone to impact.), Deck contours (Built-in contours in the deck of the board that are specifically designed to provide unrivalled traction, control and comfort for the rider.), Slick Grips (Small bulbs on the underside of the nose of the board that enhance grip and control.), Nose Bulbs (Small bulbs on the deck of the board that enhance grip and control.) Board Dimensions: Length: 43" Tail: 17" Nose: 12" Width: 21.75"@18" + view more Mike Stewart 43" length Polypropylene (Polypro) Bat Mike Stewart Science MS1-2 LTD 43" Bodyboard Mike Stewart Science MS1 LTD 42" Bodyboard $224.95 From Mike: "The Science 1 is the culmination of everything I have learned about board design over the last twenty years. It features a contoured deck to optimize correct body posture, holding you in during critical turns and riding. The exclusive 'Lock' - a small cup-like cushion that surrounds your elbow, locking it in to the key riding position. Deck and hull Hand Bulbs at the front of the board enhance your grip. A rear deck channel clutches your legs yet still allows for easy weight distribution. Inside the board is an extruded Polypropylene core with a composite stringer. All this works in conjunction with a highly refined template to create a very functional system for performance." This board features a world first for the industry: The Compression Cell. The Compression Cells are soft impact absorbing cells held in a structural Polypropylene core matrix. The compression cells are placed under the elbows and in strategic areas of the board prone to impact. Features: Core: PP (This core material is designed for speed and projection. Its durability is unrivalled by any other core. Lightweight and rigid, this core will perform exceptionally well in warmer waters where other cores become slow and unresponsive) Stringer: EFG Stringer (Designed to add longevity to a board by improving stiffness and recoil while also greatly increasing the ability for projection. The stringer also enhances performance and control.) Deck: 8LB PE HAC (a Non Crosslink Polyethylene skin. Heat Activated film refers to a special coating layer that is applied to one side of the skin, alowing a strong bond to PP cores. Super comfortable and also very durable.) Slick: Surlyn Channeled Slick (Is your only choice for slick if you demand the greatest amount of response and durability. This high performance slick is the finest grade surlyn made only by Dupont, featuring elastic-like qualities and superior projection) Channels: Graduated channels (Greatly enhance control and drive, ensuring the rider has maximum command over their board when bottom turning, trimming and transitioning from rail to rail.) Tail: Clipped crescent tail (Provides superior control and hold on the wave face while also allowing for ease of rail to rail transitions and release from carves and spins.) Additional Features: Compression cells (soft impact absorbing cells held in a structural polypropylene core matrix. Placed under the elbows and in strategic areas of the board prone to impact.), Deck contours (Built-in contours in the deck of the board that are specifically designed to provide unrivalled traction, control and comfort for the rider.), Slick Grips (Small bulbs on the underside of the nose of the board that enhance grip and control.), Nose Bulbs (Small bulbs on the deck of the board that enhance grip and control.) Board Dimensions: Length: 42" Tail: 17.5" Nose: 11.75" Width: 20.25" Length: 42" + view more Mike Stewart 42" length Polypropylene (Polypro) Crescent Mike Stewart Science MS1 LTD 42" Bodyboard Mike Stewart Science MS1-2 LTD 41" Bodyboard $224.95 From Mike: "The Science 1 is the culmination of everything I have learned about board design over the last twenty years. It features a contoured deck to optimize correct body posture, holding you in during critical turns and riding. The exclusive 'Lock' - a small cup-like cushion that surrounds your elbow, locking it in to the key riding position. Deck and hull Hand Bulbs at the front of the board enhance your grip. A rear deck channel clutches your legs yet still allows for easy weight distribution. Inside the board is an extruded Polypropylene core with a composite stringer. All this works in conjunction with a highly refined template to create a very functional system for performance." This board features a world first for the industry: The Compression Cell. The Compression Cells are soft impact absorbing cells held in a structural Polypropylene core matrix. The compression cells are placed under the elbows and in strategic areas of the board prone to impact. Features: Core: PP (This core material is designed for speed and projection. Its durability is unrivalled by any other core. Lightweight and rigid, this core will perform exceptionally well in warmer waters where other cores become slow and unresponsive) Stringer: EFG Stringer (Designed to add longevity to a board by improving stiffness and recoil while also greatly increasing the ability for projection. The stringer also enhances performance and control.) Deck: 8LB PE HAC (a Non Crosslink Polyethylene skin. Heat Activated film refers to a special coating layer that is applied to one side of the skin, alowing a strong bond to PP cores. Super comfortable and also very durable.) Slick: Surlyn Channeled Slick (Is your only choice for slick if you demand the greatest amount of response and durability. This high performance slick is the finest grade surlyn made only by Dupont, featuring elastic-like qualities and superior projection) Channels: Graduated channels (Greatly enhance control and drive, ensuring the rider has maximum command over their board when bottom turning, trimming and transitioning from rail to rail.) Tail: Clipped crescent tail (Provides superior control and hold on the wave face while also allowing for ease of rail to rail transitions and release from carves and spins.) Additional Features: Compression cells (soft impact absorbing cells held in a structural polypropylene core matrix. Placed under the elbows and in strategic areas of the board prone to impact.), Deck contours (Built-in contours in the deck of the board that are specifically designed to provide unrivalled traction, control and comfort for the rider.), Slick Grips (Small bulbs on the underside of the nose of the board that enhance grip and control.), Nose Bulbs (Small bulbs on the deck of the board that enhance grip and control.) Board Dimensions: Length: 41" Tail: 17" Nose: 11.5" Width: 20" + view more Mike Stewart 41" length Polypropylene (Polypro) Crescent Mike Stewart Science MS1-2 LTD 41" Bodyboard Mike Stewart Science MS1-1 44" Bodyboard $205.95 Mike Stewart says it best: "The Science 1 is the culmination of everything I have learned about board design over the last twenty years. It features a contoured deck to optimize correct body posture, holding you in during critical turns and riding. The exclusive "LOCK", a small cup like cushion that surrounds your elbow, locking it in the keyriding position. Deck and hull hand bulbs, at the front of the board enhance your grip. Rear deck channels clutch your legs yet still allow for easy weight distribution. The Delta Tail is like a bat tail that's less curvy between release points and creates less drag with more hold, allowing incredible hold in powerful turns and rail to rail transitions. Inside the board is an extruded Polypropylene core with a composite stringer system. AII of this works in conjunction with a highly-refined template to create a very functional system for performance." Board Dimensions: Length: 44" Width: 21.75" Nose to widepoint: 18" Nose: 12: Tail: 17" Features: 1 Stringer Contoured deck Nose bulbs Channels Surlyn bottom + view more Mike Stewart 44" length Polypropylene (Polypro) Bat Mike Stewart Science MS1-1 44" Bodyboard Mike Stewart Science MS1-1 43.75" Bodyboard $205.95 Mike Stewart says it best: "The Science 1 is the culmination of everything I have learned about board design over the last twenty years. It features a contoured deck to optimize correct body posture, holding you in during critical turns and riding. The exclusive "LOCK", a small cup like cushion that surrounds your elbow, locking it in the keyriding position. Deck and hull hand bulbs, at the front of the board enhance your grip. Rear deck channels clutch your legs yet still allow for easy weight distribution. The Delta Tail is like a bat tail that's less curvy between release points and creates less drag with more hold, allowing incredible hold in powerful turns and rail to rail transitions. Inside the board is an extruded Polypropylene core with a composite stringer system. AII of this works in conjunction with a highly-refined template to create a very functional system for performance." Board Dimensions: Length: 43.75" Tail: 17" Bat Nose: 12" Width: "22@18 " down Board Features: 1 Stringer Contoured deck Nose bulbs Channels Surlyn bottom + view more Mike Stewart 43.75" length Polypropylene (Polypro) Bat Mike Stewart Science MS1-1 43.75" Bodyboard Mike Stewart Science MS1-1 41" PP Bodyboard $204.95 Mike Stewart says it best: "The Science 1 is the culmination of everything I have learned about board design over the last twenty years. It features a contoured deck to optimize correct body posture, holding you in during critical turns and riding. The exclusive "LOCK", a small cup like cushion that surrounds your elbow, locking it in the keyriding position. Deck and hull hand bulbs, at the front of the board enhance your grip. Rear deck channels clutch your legs yet still allow for easy weight distribution. The Delta Tail is like a bat tail that's less curvy between release points and creates less drag with more hold, allowing incredible hold in powerful turns and rail to rail transitions. Inside the board is an extruded Polypropylene core with a composite stringer system. AII of this works in conjunction with a highly-refined template to create a very functional system for performance." Board Dimensions: Length: 41" Tail: 17 inches Delta Bat Nose: 11.5 inches Width: 20 inches Board Features: 1 Stringer Contoured deck Nose bulbs Channels Surlyn bottom + view more Mike Stewart 41" length Polypropylene (Polypro) Bat Mike Stewart Science MS1-1 41" PP Bodyboard Mike Stewart Science MS1-1 40" PP Bodyboard $204.95 Mike Stewart says it best: "The Science 1 is the culmination of everything I have learned about board design over the last twenty years. It features a contoured deck to optimize correct body posture, holding you in during critical turns and riding. The exclusive "LOCK", a small cup like cushion that surrounds your elbow, locking it in the keyriding position. Deck and hull hand bulbs, at the front of the board enhance your grip. Rear deck channels clutch your legs yet still allow for easy weight distribution. The Delta Tail is like a bat tail that's less curvy between release points and creates less drag with more hold, allowing incredible hold in powerful turns and rail to rail transitions. Inside the board is an extruded Polypropylene core with a composite stringer system. AII of this works in conjunction with a highly-refined template to create a very functional system for performance." Length: 40 inches Width: 20" Nose to widepoint: 17.5" Tail: 15.5" Bat Nose: 10.75" Features: 1 stringer, Contoured deck, Nose bulbs, Channels, Surlyn bottom + view more Mike Stewart 40" length Polypropylene (Polypro) Bat Mike Stewart Science MS1-1 40" PP Bodyboard Mike Stewart Science MS1-2 42" 3D Bodyboard $179.95 The all-new MS1 3D provides everything you need, and nothing you don't. The flat deck provides a perfect platform to perfect your dropknee riding, and finger bulbs on the top corners of the slick for max grip during prone efforts, it's a sick combo board. The crescent tail, Surlyn bottom, and channels give more hold, allowing powerful turns. Inside, the board is 3D layered core featuring a sandwich of PE and Polypro core to give a bit of flex when you need it with just the right amount of stiffness with a composite stringer system. AII of this works in conjunction with a highly-refined template to create a very functional system for performance." SPECS Length: 42" Width: 21" Nose to widepoint: 18" Nose: 11.5" Tail: 16.5" + view more Mike Stewart 42" length 3D Triple Layer Crescent Mike Stewart Science MS1-2 42" 3D Bodyboard Mike Stewart Science MS1 41" 3D Bodyboard $179.95 The all-new MS1 3D provides everything you need, and nothing you don't. The flat deck provides a perfect platform to perfect your dropknee riding, and finger bulbs on the top corners of the slick for max grip during prone efforts, it's a sick combo board. The crescent tail, Surlyn bottom, and channels give more hold, allowing powerful turns. Inside, the board is 3D layered core featuring a sandwich of PE and Polypro core to give a bit of flex when you need it with just the right amount of stiffness with a composite stringer system. AII of this works in conjunction with a highly-refined template to create a very functional system for performance." SPECS Length: 41" Width: 20.5" Nose to widepoint: 17" Nose: 11.5" Tail: 16.5" + view more Mike Stewart 41" length 3D Triple Layer Crescent Mike Stewart Science MS1 41" 3D Bodyboard Mike Stewart Science MS1-2 40" 3D Bodyboard $179.95 The all-new MS1 3D provides everything you need, and nothing you don't. The flat deck provides a perfect platform to perfect your dropknee riding, and finger bulbs on the top corners of the slick for max grip during prone efforts, it's a sick combo board. The crescent tail, Surlyn bottom, and channels give more hold, allowing powerful turns. Inside, the board is 3D layered core featuring a sandwich of PE and Polypro core to give a bit of flex when you need it with just the right amount of stiffness with a composite stringer system. AII of this works in conjunction with a highly-refined template to create a very functional system for performance." SPECS Length: 40" Width: 20" Nose to widepoint: 16" Nose: 11" Tail: 15.75" + view more Mike Stewart 40" length 3D Triple Layer Crescent Mike Stewart Science MS1-2 40" 3D Bodyboard Mike Stewart Science MS XI PP Contoured 43.5" Bodyboard $224.95 Board Dimensions: Length: 43.5" Nose: 12.5" Width: 22"@ 18.5" Tail: 17" Single stringer Thumb bar Slick bulbs Contoured deck Graduated channels Crescent tail Core: Polypro + view more Mike Stewart 43.5 Polypropylene (Polypro) Crescent Mike Stewart Science MS XI PP Contoured 43.5" Bodyboard Mike Stewart Science MS11 LTD 42.5" Bodyboard $224.95 This board features a world first for the industry: The Compression Cell. The Compression Cells are soft impact absorbing cells held in a structural Polypropylene core matrix. The compression cells are placed under the elbows and in strategic areas of the board prone to impact. Features: Core: XPP (This core material is designed for speed and projection. Its durability is unrivalled by any other core. Lightweight and rigid, this core will perform exceptionally well in warmer waters where other cores become slow and unresponsive) Stringer: Stringer (Designed to add longevity to a board by improving stiffness and recoil while also greatly increasing the ability for projection. The stringer also enhances performance and control.) Deck: Wave Cushion HAC (a Non Crosslink Polyethylene skin. Heat Activated film refers to a special coating layer that is applied to one side of the skin, alowing a strong bond to PP cores. Super comfortable and also very durable.) Slick: Surlyn Channelled Slick (Is your only choice for slick if you demand the greatest amount of response and durability. This high performance slick is the finest grade surlyn made only by dupont, featuring elastic-like qualities and superior projection) Channels: Graduated Channels (Greatly enhance control and drive, ensuring the rider has maximum command over their board when bottom turning, trimming and transitioning from rail to rail.) Tail: Clipped Crescent Tail (Provides superior control and hold on the wave face while also allowing for ease of rail to rail transitions and release from carves and spins.) Additional Features: Compression Cells (soft impact absorbing cells held in a structural Polypropylene core matrix. Placed under the elbows and in strategic areas of the board prone to impact.), Deck contours (Built-in contours in the deck of the board that are specifically designed to provide unrivalled traction, control and comfort for the rider.), Slick Grips (Small bulbs on the underside of the nose of the board that enhance grip and control.), Nose Bulbs (Small bulbs on the deck of the board that enhance grip and control. Nose: 12" Tail: 16.5" Width: 21" Nose to widepoint: 19.25" + view more Mike Stewart 42.5" length Polypropylene (Polypro) Crescent Mike Stewart Science MS11 LTD 42.5" Bodyboard Mike Stewart Science MS11-1 LTD 41.5" Bodyboard $224.95 This board features a world first for the industry: The Compression Cell. The Compression Cells are soft impact-absorbing cells held in a structural polypropylene core matrix. The compression cells are placed under the elbows and in strategic areas of the board prone to impact. Features: Core: XPP (This core material is designed for speed and projection. Its durability is unrivalled by any other core. Lightweight and rigid, this core will perform exceptionally well in warmer waters where other cores become slow and unresponsive) Stringer: Stringer (Designed to add longevity to a board by improving stiffness and recoil while also greatly increasing the ability for projection. The stringer also enhances performance and control.) Deck: Wave Cushion HAC (a Non-Crosslink Polyethylene skin. Heat-activated film refers to a special coating layer that is applied to one side of the skin, alowing a strong bond to PP cores. Super-comfortable and also very durable.) Slick: Surlyn channeled slick (Is your only choice for slick if you demand the greatest amount of response and durability. This high performance slick is the finest grade Surlyn made only by Dupont, featuring elastic-like qualities and superior projection) Channels: Graduated Channels (Greatly enhance control and drive, ensuring the rider has maximum command over their board when bottom turning, trimming and transitioning from rail to rail.) Tail: Clipped Crescent Tail (Provides superior control and hold on the wave face while also allowing for ease of rail-to-rail transitions and release from carves and spins.) Additional features: Compression Cells (soft impact absorbing cells held in a structural Polypropylene core matrix. Placed under the elbows and in strategic areas of the board prone to impact.), Deck contours (Built-in contours in the deck of the board that are specifically designed to provide unrivaled traction, control and comfort for the rider.), Slick Grips (Small bulbs on the underside of the nose of the board that enhance grip and control.), Nose Bulbs (Small bulbs on the deck of the board that enhance grip and control.) SPECS: Length: 41.5" Width: 21" Nose to widepoint: 16.75" Nose: 12" Tail: 16" + view more Mike Stewart 41.5" length Polypropylene (Polypro) Crescent Mike Stewart Science MS11-1 LTD 41.5" Bodyboard Mike Stewart Science MS11-1 PP 43.5" Bodyboard $204.95 Board Dimensions: Length: 43.5" Nose: 12.5" Width: 22"@ 18.5" Tail: 17" Single stringer Thumb bar Slick bulbs Graduated channels Crescent tail Core: Polypro + view more Mike Stewart 43.5 Polypropylene (Polypro) Crescent Mike Stewart Science MS11-1 PP 43.5" Bodyboard Mike Stewart Science MS11 PP 42.5" Bodyboard $204.95 A premium new model from Science, the XI (11) combines top of the line materials and craftmanship into a proven template designed for speed and projection. A board for those who demand nothing but the best. Features: Core: PP (This core material is designed for speed and projection. Its durability is unrivalled by any other core. Lightweight and rigid, this core will perform exceptionally well in warmer waters where other cores become slow and unresponsive) Stringer: Stringer (Designed to add longevity to a board by improving stiffness and recoil while also greatly increasing the ability for projection. The stringer also enhances performance and control.) Deck: 8LB PE HAC (a Non-Crosslink polyethylene skin. Heat activated film refers to a special coating layer that is applied to one side of the skin, alowing a strong bond to PP cores. Super comfortable and also very durable.) Slick: Surlyn Channeled Slick (Is your only choice for slick if you demand the greatest amount of response and durability. This high-performance slick is the finest grade Surlyn made only by Dupont, featuring elastic-like qualities and superior projection) Channels: Graduated Channels (Greatly enhance control and drive, ensuring the rider has maximum command over their board when bottom turning, trimming and transitioning from rail to rail.) Tail: Clipped Crescent Tail (Provides superior control and hold on the wave face while also allowing for ease of rail to rail transitions and release from carves and spins.) Additional Features: Slick Grips (Small bulbs on the underside of the nose of the board that enhance grip and control.) SPECS: Length: 42.5: Width: 21.5" Nose to widepoint: 15.5" Nose: 12.25" Tail: 17" + view more Mike Stewart 42.5" length Polypropylene (Polypro) Crescent Mike Stewart Science MS11 PP 42.5" Bodyboard Mike Stewart Science MS11 PP 41.5" Bodyboard $204.95 A premium new model from Science, the XI (11) combines top of the line materials and craftmanship into a proven template designed for speed and projection. A board for those who demand nothing but the best. Features: Core: PP (This core material is designed for speed and projection. Its durability is unrivalled by any other core. Lightweight and rigid, this core will perform exceptionally well in warmer waters where other cores become slow and unresponsive) Stringer: Stringer (Designed to add longevity to a board by improving stiffness and recoil while also greatly increasing the ability for projection. The stringer also enhances performance and control.) Deck: 8LB PE HAC (a Non-Crosslink polyethylene skin. Heat activated film refers to a special coating layer that is applied to one side of the skin, alowing a strong bond to PP cores. Super comfortable and also very durable.) Slick: Surlyn Channeled Slick (Is your only choice for slick if you demand the greatest amount of response and durability. This high-performance slick is the finest grade Surlyn made only by Dupont, featuring elastic-like qualities and superior projection) Channels: Graduated Channels (Greatly enhance control and drive, ensuring the rider has maximum command over their board when bottom turning, trimming and transitioning from rail to rail.) Tail: Clipped Crescent Tail (Provides superior control and hold on the wave face while also allowing for ease of rail to rail transitions and release from carves and spins.) Additional Features: Slick Grips (Small bulbs on the underside of the nose of the board that enhance grip and control.) SPECS: Length: 41.5" Width: 21" Nose to widepoint: 15.5" Nose: 12" Tail: 16.75" + view more Mike Stewart 41.5" length Polypropylene (Polypro) Crescent Mike Stewart Science MS11 PP 41.5" Bodyboard Mike Stewart Science MS11-2 PP 40.5" Bodyboard $204.95 A premium new model from Science, the XI (11) combines top of the line materials and craftmanship into a proven template designed for speed and projection. A board for those who demand nothing but the best. Features: Core: PP (This core material is designed for speed and projection. Its durability is unrivalled by any other core. Lightweight and rigid, this core will perform exceptionally well in warmer waters where other cores become slow and unresponsive) Stringer: Stringer (Designed to add longevity to a board by improving stiffness and recoil while also greatly increasing the ability for projection. The stringer also enhances performance and control.) Deck: 8LB PE HAC (a Non-Crosslink polyethylene skin. Heat activated film refers to a special coating layer that is applied to one side of the skin, alowing a strong bond to PP cores. Super comfortable and also very durable.) Slick: Surlyn Channeled Slick (Is your only choice for slick if you demand the greatest amount of response and durability. This high-performance slick is the finest grade Surlyn made only by Dupont, featuring elastic-like qualities and superior projection) Channels: Graduated Channels (Greatly enhance control and drive, ensuring the rider has maximum command over their board when bottom turning, trimming and transitioning from rail to rail.) Tail: Clipped Crescent Tail (Provides superior control and hold on the wave face while also allowing for ease of rail to rail transitions and release from carves and spins.) Additional Features: Slick Grips (Small bulbs on the underside of the nose of the board that enhance grip and control.) SPECS: Length: 40.5 Width: 20.75" Nose to widepoint: 16" Nose: 11.5" Tail: 16" crescent + view more Mike Stewart 40.5" length Polypropylene (Polypro) Crescent Mike Stewart Science MS11-2 PP 40.5" Bodyboard Mike Stewart Science MS3 44" Bodyboard $205.95 * PolyPro core * TC8 deck * Surlyn PP Bottom * TC8 Outer Rail * Bat Tail * Channels * 2 stringers * Slick Grips * Elbow Pads. Length: 44 inches Width: 22.25 inches Nose to wide point: 18 inches Nose: 13 inches Tail: 17.5 inches Mike Stewart has been pushing limits and designing bodyboards since the beginning. . Subtle, durable elbow and hip panels provide enhanced geometry for smooth controlled turns. The ultimate prone shape balances maneuverability and speed to bust while linking moves seamlessly. FREE SHIPPING ON THIS BOARD IN THE USA!! Length:44 Width:22.75 Nose to Wide Point:18.75 Nose:12 Tail:18 + view more Mike Stewart 44" length Polypropylene (Polypro) Bat Mike Stewart Science MS3 44" Bodyboard Mike Stewart Science MS3-2 42.5" Bodyboard $199.95 * Linear Polypro Core * Tri Laminate deck and rails skins * Surlyn tri laminate bottom * TC8 Outer Rail * Bat Tail * Channels * 1 woven composite stringer *Slick Grips * Elbow Pads. Length: 42.5" Width: 21.5" Nose to wide point: 21" Nose: 11.75 inches Tail: 17 5/8 inches Mike Stewart has been pushing limits and designing bodyboards since the beginning. Subtle, durable elbow and hip panels provide enhanced geometry for smooth, controlled turns. The ultimate prone shape balances maneuverability and speed to bust while linking moves seamlessly. + view more Mike Stewart 42.5" length Polypropylene (Polypro) Bat Mike Stewart Science MS3-2 42.5" Bodyboard Mike Stewart Science MS3-2 41.5" Bodyboard $169.95 The classic prone rocket featuring a contoured deck. * Polypro core * TC8 deck * TC8 Outer Rail * Bat Tail * Channels * 1 stringer Nose Width: 11.5 inches Nose to Wide point: 19.75 inches Width: 21 1/8 inches Tail Width: 17.25 inches + view more Mike Stewart 41.5" length Polypropylene (Polypro) Bat Mike Stewart Science MS3-2 41.5" Bodyboard Mike Stewart Science MS3-0 41.5" Bodyboard $199.95 * Polypro core * TC8 deck * Surlyn PP Bottom * TC8 Outer Rail * Bat Tail * Channels * 1 stringer *Slick Grips *Elbow Pads. Nose Width: 11.5 inches Nose to Wide: 19.75 inches Width: 21 1/8 inches Tail Width: 17.25 inches FREE SHIPPING ON THIS BOARD IN THE USA!! + view more Mike Stewart 41.5" length Polypropylene (Polypro) Bat Mike Stewart Science MS3-0 41.5" Bodyboard Mike Stewart Science MS5-2 43.5" Bodyboard $199.95 * Linear Polypro Core * Tri Laminate deck and rails skins * Surlyn tri laminate bottom * TC8 Outer Rail * Crescent Tail * Graduated Channels * 1 RCS woven composite stringer * Slick Bulbs * Raised contoured deck. Nose Width:11.9 Nose to Wide: 20.25 Width: 21 1/8 Tail Width: 17 5/8 For those that like the prone performance of the MS3 but want more versatility the MS5 has a crescent tail for additional hold for steep drops and dk rides. All the same prone features as the MS3: Nose bulbs, Graduated channels, Contoured deck panels, 1 RCS stringer without the bat tail. All with a linear PP core for unmatched projection madness. + view more Mike Stewart 42.5" length Polypropylene (Polypro) Crescent Mike Stewart Science MS5-2 43.5" Bodyboard Mike Stewart Science MS5 42.5" Bodyboard $199.95 * Linear Polypro Core * Tri Laminate deck and rails skins * Surlyn tri laminate bottom * TC8 Outer Rail * Crescent Tail * Graduated Channels * 1 RCS woven composite stringer * Slick Bulbs * Raised contoured deck. Nose Width:11.9 Nose to Wide: 20.25 Width: 21 1/8 Tail Width: 17 5/8 For those that like the prone performance of the MS3 but want more versatility the MS5 has a crescent tail for additional hold for steep drops and dk rides. All the same prone features as the MS3: Nose bulbs, Graduated channels, Contoured deck panels, 1 RCS stringer without the bat tail. All with a linear PP core for unmatched projection madness. + view more Mike Stewart 42.5" length Polypropylene (Polypro) Crescent Mike Stewart Science MS5 42.5" Bodyboard Mike Stewart Science MS5 41.5" Bodyboard $169.95 For those that like the prone performance of the MS3 but want more versatility the MS5 has a crescent tail for additional hold for steep drops and dk rides. All the same prone features as the MS3: Graduated channels, Contoured deck panels, 1 RCS stinger without the bat tail. All with a linear PP core for unmatched projection madness. Board Features: * Linear PolyPro Core * Tri Laminate deck and rails skins * Extruded PE Rails * Crescent Tail * Graduated Channels * 1 RCS woven composite stringer + view more Mike Stewart 41.5" length Polypropylene (Polypro) Crescent Mike Stewart Science MS5 41.5" Bodyboard Mike Stewart Science MS5-2 41.5" Bodyboard $199.95 For those that like the prone performance of the MS3 but want more versatility the MS5 has a crescent tail for additional hold for steep drops and dk rides. All the same prone features as the MS3: Nose bulbs, Graduated channels, Contoured deck panels, 1 RCS stinger without the bat tail. All with a linear PP core for unmatched projection madness. Board Features: * Linear PolyPro Core * Tri Laminate deck and rails skins * Surlyn tri laminate bottom * Extruded PE Rails * Crescent Tail * Graduated Channels * 1 RCS woven composite stringer * Slick Bulbs * Raised contoured deck SPECS: Length: 41.5" Width: 21" Nose to widepoint: 17.5" Nose: 11.5" Tail: 16.5" + view more Mike Stewart 41.5" length Polypropylene (Polypro) Crescent Mike Stewart Science MS5-2 41.5" Bodyboard Mike Stewart Science MS5-2 40.5" Bodyboard $199.95 For those that like the prone performance of the MS3 but want more versatility the MS5 has a crescent tail for additional hold for steep drops and dk rides. All the same prone features as the MS3: Nose bulbs, Graduated channels, Contoured deck panels, RCS stinger without the bat tail. All with a linear PP core for unmatched projection madness. Board Features: * Linear PolyPro Core * Tri Laminate deck and rails skins * Surlyn tri laminate bottom * TC8 Outer Rail * Crescent Tail * Graduated Channels * 1 RCS woven composite stringer * Slick Bulbs * Raised contoured deck. Board Dimensions: Nose Width: 10.5 inches Nose to Wide: 18 1/8 inches Width: 19.75 inches Tail Width: 16.5 inches + view more Mike Stewart 40.5" length Polypropylene (Polypro) Crescent Mike Stewart Science MS5-2 40.5" Bodyboard Mike Stewart Science MS7 42 Bodyboard $164.95 Board Features: * Dow Core * TC8 Deck * Surlyn PE Bottom * Crescent Tail * Channels * 2 RCS woven composite stringers Board Dimensions: Nose Width: 11.125 inches Nose to Wide: 20.125 inches Width: 21 inches Tail Width: 17.25 inches + view more Mike Stewart 42" length Polyethylene (DOW) Crescent Mike Stewart Science MS7 42 Bodyboard Mike Stewart Science MS7-2 41 Bodyboard $164.95 Board Features: * High tolerance PE core * Tri Laminate deck and rails Skins * Surlyn tri laminate bottom * Crescent Tail * Channels * 2 RCS woven composite stringers Board Dimensions: Nose Width:11.125 inches Nose to Wide: 20.125 inches Width: 21 inches Tail Width: 17.25 inches + view more Mike Stewart 41" length Polypropylene (Polypro) Crescent Mike Stewart Science MS7-2 41 Bodyboard Mike Stewart Science MS7-2 40 Bodyboard $164.95 Board Features: * Dow Core * TC8 Deck * Surlyn PE Bottom * Crescent Tail * Channels * 2 Composite stringers Board Dimensions: Nose Width:10.375 inches Nose to Wide: 19 inches Width: 20 inches Tail Width: 16.5 inches + view more Mike Stewart 40" length Polyethylene (DOW) Crescent Mike Stewart Science MS7-2 40 Bodyboard Mike Stewart Science MS9-1 42 Bodyboard $159.95 Board Features: PE Core TC8 Deck Surlyn PE Bottom Bat Tail Channels 2 Stringers Slick Grips Board Dimensions: Width: 21.75" Nose to widepoint: 17.5" Nose: 12.5" Tail: 17.25" + view more Mike Stewart 42" length Polyethylene (DOW) Bat Mike Stewart Science MS9-1 42 Bodyboard Mike Stewart Science MS9-1 41.5 Bodyboard $164.95 PE Core TC8 Deck Surlyn PE Bottom Bat Tail Channels 2 Stringers Slick Grips Width: 21" Nose to widepoint: 17" Nose: 12" Tail: 16.75" + view more Mike Stewart 41.5" length Polyethylene (DOW) Bat Mike Stewart Science MS9-1 41.5 Bodyboard Mike Stewart Science MS9-1 40 Bodyboard $142.95 PE Core TC8 Deck Surlyn PE Bottom Bat Tail Channels 2 Stringers Slick Grips Width: 20.75 Nose to widepoint: 15 Nose: 11.5 Tail: 16.75 + view more Mike Stewart 40" length Polyethylene (DOW) Bat Mike Stewart Science MS9-1 40 Bodyboard Mike Stewart Science MS10-2 42" Bodyboard $194.95 The MS 10 all killer and no filler! It has a versatile template that can be ridden prone or dropknee. Flat deck (no contours). The combination of the polypro core, stringer and Fibermesh keeps this board nice and stiff. SPECS- Core: PP Deck: 8lb PE Slick: Surlyn by DuPont Tail: Crescent Stringer: 1 x EFG stringer Graduated Channels Nose Bulbs Fibermesh Length: 42" Width: 21.5" Nose to widepoint: 18.5" Nose: 11.5" Tail: 16.75" + view more Mike Stewart 42" length Polypropylene (Polypro) Crescent Mike Stewart Science MS10-2 42" Bodyboard Mike Stewart Science MS10-1 41" Bodyboard $194.95 The MS 10 all killer and no filler! It has a versatile template that can be ridden prone or dropknee. Flat deck (no contours). The combination of the polypro core and stringer keep this board nice and stiff. Core: PP Deck: 8lb PE Slick: Surlyn by DuPont Tail: Crescent Stringer: 1 x EFG stringer Graduated Channels Nose Bulbs Length: 41" Width: 20.5" Nose to widepoint: 17.5" Nose: 11.25" Tail: 16" + view more Mike Stewart 41" length Polypropylene (Polypro) Crescent Mike Stewart Science MS10-1 41" Bodyboard Mike Stewart Science MS10-2 40" Bodyboard $194.95 The MS 10 all killer and no filler! It has a versatile template that can be ridden prone or dropknee. Flat deck (no contours). The combination of the polypro core, stringer and Fibermesh keeps this board nice and stiff. SPECS- Core: PP Deck: 8lb PE Slick: Surlyn by DuPont Tail: Crescent Stringer: 1 x EFG stringer Graduated Channels Nose Bulbs Fibermesh Length: 40" Width: 20.25" Nose to widepoint: 17" Nose: 11" Tail: 16" + view more Mike Stewart 40" length Polypropylene (Polypro) Crescent Mike Stewart Science MS10-2 40" Bodyboard Mike Stewart HP-1 41.75 Bodyboard $189.95 Core: Polypro Bottom: Surlyn with subtle center contour Deck and rails: Polyethylene Tail: Crescent Channels: Graduated Features: Single stringer Finger bulbs Specs: Width: 20.5" Nose to widepoint: 18" Nose: 10.75" Tail: 16" + view more Mike Stewart 41.75" length Polypropylene (Polypro) Crescent Mike Stewart HP-1 41.75 Bodyboard Mike Stewart HP 40.75-1 Bodyboard $179.95 Core: Polypro Bottom: Surlyn with slight concave Deck and rails: Polyethylene Tail: Crescent Channels: Graduated Features: Single stringer Finger bulbs Specs: Width: 20" Nose to widepoint: 17.5" Nose: 10.5" Tail: 15.5" + view more Mike Stewart 40.75" length Crescent Mike Stewart HP 40.75-1 Bodyboard Mike Stewart Science DK5 43" Bodyboard $189.95 The Science DK Five bodyboard combines a hybrid DK template with top of the line features to create the ultimate DK board. Polypro Core for strength and stabilty, a Surlyn slick for heightened response and a stringer for dependability. Features: Core: XPP (This core material is designed for speed and projection. Its durability is unrivalled by any other core. Lightweight and rigid, this core will perform exceptionally well in warmer waters where other cores become slow and unresponsive) Stringer: Stringer (Designed to add longevity to a board by improving stiffness and recoil while also greatly increasing the ability for projection. The stringer also enhances performance and control.) Deck: Wave Cushion HAC (a Non Crosslink Polyethylene skin. Heat Activated film refers to a special coating layer that is applied to one side of the skin, allowing a strong bond to PP cores. Super comfortable and also very durable.) Slick: Surlyn Channelled Slick (Is your only choice for slick if you demand the greatest amount of response and durability. This high performance slick is the finest grade surlyn made only by dupont, featuring elastic-like qualities and superior projection) Channels: Graduated Channels (Greatly enhance control and drive, ensuring the rider has maximum command over their board when bottom turning, trimming and transitioning from rail to rail.) Tail: Clipped Crescent Tail (Provides superior control and hold on the wave face while also allowing for ease of rail to rail transitions and release from carves and spins.) Additional Features: Hybrid Template Specs: Width: 21.5" Nose to widepoint: 19.5" Nose: 11.5" Tail: 17" + view more Mike Stewart 43" length Polypropylene (Polypro) Crescent Mike Stewart Science DK5 43" Bodyboard Mike Stewart Science DK5-1 42" Bodyboard $189.95 The Science DK Five bodyboard combines a hybrid DK template with top of the line features to create the perfect all-around board that leans more toward a DK shape without sacrificing prone riding potential. Polypro core for strength and stability, a Surlyn slick for heightened response along with a stringer for dependability. Features: Core: XPP (This core material is designed for speed and projection. Its durability is unrivaled by any other core. Lightweight and rigid, this core will perform exceptionally well in warmer waters where other cores become slow and unresponsive) Stringer: 1 Stringer (Designed to add longevity to a board by improving stiffness and recoil while also greatly increasing the ability for projection. The stringer also enhances performance and control.) Deck: Wave Cushion HAC (a Non Crosslink Polyethylene skin. Heat Activated film refers to a special coating layer that is applied to one side of the skin, allowing a strong bond to PP cores. Super comfortable and also very durable.) Slick: Surlyn Channeled Slick (Your only choice for slick if you demand the greatest amount of response and durability. This high performance slick is the finest grade Surlyn made only by Dupont, featuring elastic-like qualities and superior projection) Channels: Graduated Channels (Greatly enhance control and drive, ensuring the rider has maximum command over their board when bottom turning, trimming and transitioning from rail to rail.) Tail: Clipped Crescent Tail (Provides superior control and hold on the wave face while also allowing for ease of rail to rail transitions and release from carves and spins.) Additional Features: Hybrid Template Specs: Width: 21" Nose to widepoint: 18.5" Nose: 11" Tail: 16.5" + view more Mike Stewart 42" length Polypropylene (Polypro) Crescent Mike Stewart Science DK5-1 42" Bodyboard Mike Stewart Rig-1 42.25" Bodyboard $147.00 Young Australian Tom Rigby has worked with Mike Stewart to refine this pro shape. Board Features: Core: Polyethylene Bottom: HDPE Deck and rails: Crosslink polyethylene Tail: Crescent Channels: Graduated Features: Single stringer Board Specs: Width: 21.25" Nose to widepoint: 19.5" Nose: 10.75" Tail: 16.5" + view more Mike Stewart 42" length Polyethylene (DOW) Crescent Mike Stewart Rig-1 42.25" Bodyboard