This Twin Fin kit works perfectly for bodyboards, or with the CatchSurf Beater if you want to convert your finless Beater to a twin fin! Email us and we can email back a template to print out and lay over the bottom of your Beater board so you know where to punch the holes for the fins.
To install, you only need to punch four holes through your board and pop the screws through to connect with the skegs on the bottom.
• Distance between centers of screw holes on skeg: 4 inches • Skeg length from front to back along the base: 6.75 inches • Skeg height from base to tip: 4 inches • Screw length: 2 inches
Maximum board thickness these will work with: 2.75 inches If you have a board thicker than this, check out the SUP Skeg Replacement Kit on our site.
TIP: We highly recommend applying some dish soap to the screws before installing and screwing them into the skegs to avoid having the screw snap.
(Note: This item is compatible with the classic Beater 48" and 54" boards and almost any bodyboard)