Hard plastic surfboard skeg fin set made for soft surfboards. These skegs are high performance stiffer and better-shaped fins than the standard fins that come on most soft surfboards. The right and left fins are foiled (flat on the inside, curved on the outside) for max performance. This is a thruster skeg set up that has one center fin and two foiled side fins with 6 plastic screws that attach to most soft surfboards.
Distance between screw holes on skeg: 4 inches on center
Skeg length from front to back along the base: 5 inches
Skeg height from base to tip: 4.25 inches
Screw length is 2 inches
Maximum board thickness these will work with: 2.75 inches
If you have a board thicker than this, check our SUP Fin Skeg Set.
TIP: We highly recommend applying some dish soap to the screws before installing and screwing them into the skegs to avoid having the screw snap.
Soft Surfboard Replacement Fin Set for the following type boards:
Surface, Beater, Liquid Shredder, Wavestorm, BZ, Doyle, Greco, ?etc.